关于马桶自动冲水
家中目前在用的是这个九龙卫浴的改装的,当初主要看重的是它是用干电池的,使用下来以后发现6颗干电池使用1个多月就会出现冲水无力,最后实在受不了,我直接用电表测了电压,它是4.5v供电,直接用5V1A充电头接线过去改装成接电的,又用了一段时间发现这个感应不灵敏,越来越不能忍受了,到最后感应直接距离很短,只有20cm左右,很多时候根本不能感应到。扔了又怪可惜的。


1.改装拆开观察


2.观察发现,D3在不断闪烁后表示有人存在,既然感应器没用了,就全部去掉。

3.然后用一坨锡短接D3,表示它持续有人存在。

4.然后短接干簧管3s后就会冲水,反复尝试多次,无错漏。

5.那就简单了,我们用一个米家

6.感应器,我是用的激光传感器,采用nodered,当激光传感器持续感应到有人存在超过10s,则延迟5s后检查激光传感器状态,若激光传感器感应到无人超过3s,则检查冲水继电器的状态,若为关闭状态,则打开它。如果激光传感器感应到无人未超过3s,则返回再延迟5s再次检查。

结语:
生活多的是破破烂烂,需要的是修修补补,另外有人用舵机改装冲水,等我这个坏了再说。
作者声明本文无利益相关,欢迎值友理性交流,和谐讨论~

mu0lang
校验提示文案
AI小值-家居家装
校验提示文案
AI小值-家居家装
校验提示文案
mu0lang
校验提示文案